
CONCRETE ADMIXTURES
Admixtures are ingredients other than water, aggregate cement that are added to a concrete mixture immediately before or during mixing. Cemcure Concrete Admixtures provide water reduction with retardation, reduction with accelerated setting and also entrain some air in concrete.
CEMCURE specializes in the field of Tailor Made Concrete Admixture Products based on Projects
PRODUCTS
SERVICES
- SNF BASED CONCRETE ADMIXTURES - CPLAST Ranges
- PCE BASED CONCRETE ADMIXTURES - CFLOW Ranges
- CONCRETE ACCELERATORS - PRECAST Industries, Bridge Construction, Marine structure etc.,
- CONCRETE RETARDERS -Under-ground Piling, Pipeline with Long Hawls , Column Concereting, Cold joints etc.,
- AIR ENTRAINERS – Light-weight concrete, AAC blocks,
- CONCRETE SHRINKAGE REDUCERS - Huge concrete Pours, High ambient temperature, Coastal wind concreting.
- TRANSIT MIXER CLEANERS – Unique 100% Safe – Bio Green certified - Concrete Splatter remover inside TM.
- BLOW HOLE FREE - Mould release agents – Increased Durability, Exposed non- treated free surface.
- OFFERS INDUSTRY LEADS TECHNICAL SOLUTIONS – Tailor made concrete admixture products based on Project requirement.
- Undertake challenging waterproofing services
- STRUCTURAL– REHABILIATION – Carbon Fibre Wrapping, Retrofitting – Steel , concrete, etc.,
- TRADING UNIQUE PRODUCTS – Concrete PCE, PU etc.,
- Bridge rehabilitation
- UNIQUE MOULD RELEASE AGENTS – Servicing for Precast segments and all Project segments.
- UNIQUE ACCELERATORS - For faster roll-over time and maximum utilization of resources in PRECAST Projects
CEMCURE ADMIX C2
Cemcure Admix-C2 is a white liquid that when added into concrete/ plaster mix, results in excellent water repellency of the concrete / plaster,degree of the water reduction will depend upon amount of cement + sand in mix. Specially formulated silane-siloxane emulsion,it is solvent- free and water – based. It easily mixes with concrete/plaster, gets permanently bonded with the concrete/plaster and cannot be washed out.
USES:• Can be used for freshly made concrete and mortar, RMC, manufacture of low slump cement / Concrete blocks, Concrete pavers & Precast cement products.
• Reduces water absorption over 80% in treated Concrete / Mortar/ Plaster. • Creates hydrophobic chloride & Carbon dioxide resistant substrate. • Leaves no staining or oily residue. • Non-flammable, Non-Corrosive and Non- Hazardous.
PACKING• 5 kg, 20 kg, 50 kg
CEMCURE CR6
Cemcure CR6 is a ready -to-use liquid admixture for use in concrete designed to inhibit the passage of water. Cemcure CR6 is based on highly concentrated, chloride- free integral water-proofing admixture. Cemcure CR6 has the property of reducing the amount of water required to produce a desired work ability. In addition, it delays the setting time and assists optimum compaction to achieve denser less permeable concrete
FEATURES:• Cemcure CR6 provides the following benefits to fresh and hardened concrete. • Reduces unit water content. • Increases workability and reduces segregation. • Increases effectiveness of cement. • Increases compressive strength. • Increases density • Improves impermeability.
Concrete absorbs water when it is in contact with water. When water is pressed against concrete,it passes through the concrete resulting in water leakage.Concrete is usually mixed with more water than necessary for the cement hy- -dration to give an easier placing properties to the concrete. As a result, after drying, concrete contains a large amount of continuous micro pores, paths from bleeding water, and voids beneath large aggregate which all serve to provide water passages through the concrete.These greatly affect water absorption and permeability of concrete.
Improved work ability and reduction of water by the use of Cemcure CR6 decreases segregation and bleeding,reduces micro pores, water passage and free water accumulation. As a result, water absorption and permeability are improved considerably. Further, the absolute volume of the cement usually becomes smaller after hydration,and a large number of micro pores are created. These also serve as water passages. Since Cemcure CR6 makes concrete dense enough, it greatly reduces the passage of water as time elapses. Cemcure CR6 ensures this at the most economic cement content PACKING• 5 kg, 20 kg, 50 kg
CEMPLAST LNG
Cemcure CemPlast LNG is a ready-to-use liquid admixture for use in concrete designed to inhibit the passage of water. Cemcure CemPlast LNG is based on a highly concentrated, chloride – free integral waterproofing admixture. Cemcure CemPlast LNG has the property of reducing the amount of water required to produce a desired work ability. In addition, it delays the setting time and assists optimum compaction to achieve denser less permeable concrete.
FEATURES :Cemcure CemPlast LNG provides the following benefits to fresh and hardened concrete.
• Reduces unit water content
• Increases work ability and reduces segregation
• Increases effectiveness of cement
• Increases compressive strength
• Increases density
• Improves impermeability
Concrete absorbs water when it is in contact with water. When water is pressed against concrete, it passes through the concrete resulting in water leakage. Concrete is usually mixed with more water than necessary for cement hydration to give easier placing properties to the concrete.
As a result, after drying,concrete contains a large amount of continuous micro pores, paths from bleeding water, and voids beneath large aggregate which all serve to provide water passages through the concrete.These greatly affect water absorption and permeability of concrete Improved work ability and reduction of water by use of Cemcure CemPlast LNG decreases segregation and bleeding, reduces micro pores, water passage and free water accumulation. As a result, water absorption and permeability are improved considerably.
Further, the absolute volume of cement usually becomes smaller after hydration, and a large number of micro pores are created. These also serve as water passages. Since Cemcure CemPlast LNG makes concrete dense enough, it greatly reduces the passage of the water as time elapses. Cemcure CemPlast LNG ensures this at the most economic cement content.
1kg, 5kg, 20kg
CEMPLAST MPC270
Cemcure CemPlast MPC270 is a mid range of retarding super plasticizer admixer based on PC. The Technology and Versatility of the Superplasticizers portfolio excels in high performance areas such as high strength concrete Pump ability, Self-Consolidating Concrete, Low permeability, Low water absorption concrete and Low shrinkage applications.
USES :• Can be used for freshly made concrete and mortar, RMC, manufacture of Low slump cement / Concrete blocks, Concrete pavers & Precast cement products.
• Achieves higher slump /work ability at lower water cement ratio • Compatible with all types of mineral admixers like GGBS / Flyash / Silica Fume etc. • Compatible with all type of Portland cement • Enhances concrete rheology with extended work ability • Helps to achieve higher ultimate strength and durability of concrete • Improves cohesion and eases pumping of concrete • Reduces plastic shrinkage cracks
PACKAGE :1 kg, 5 kg, 20 kg, 220 kg