Cemcure Grouting acts as a waterproofing agent in the case of water leakage through slab, tile grout decelerates the penetration of water. It can be used to fill space between two elements for bonding them or to create water – tight seal.
CEMCURE SHIELDPLUG 2K
Cemcure Shieldplug-2K is two component water based modified polyacrylic / acrylate resign gel injection for negative and positive side chemical grouting. Resign grouts are used in general building, any civil engineering structures underground tunnels, dams, reservoir and channels.USES:
• It is used for both preventive waterproofing and repair waterproofing to overcome leakages. • It can also be used for consolidate rock and subsoil . • It is chemical resistant after the polymerization, product will swell, when it contact with water to form a reliable plug.
CEMCURE GROUT HG
A Single-Component Chemical Grout
Cemcure Grout-HG is a revolutionary product which performs the same function as Cemcure Shield Plug-2K,and which can be used with a normal grouting machine. Cemcure Grout-HG is injected directly into the heart of damaged area, Cemcure Grout-HG simplifies the procedure for those areas where water is not gushing out. In such cases we will have some time for the polymerization reaction and does not have to be completed within 30 seconds.
• Can be used in pores, capillaries, cracks, joints, cavities honey comb, voids and gravel beds.
CEMCURE GROUT S
Cemcure Grout-S relates to grouting method, it is a clear liquid and can be grouted in wet conditions.This can also be added to cement slurry for fast setting.
In situation where waterproofing is required against fast running water, cementitious or clay grouts will not set as quickly as required in such situation such grouting can be enhanced by use of catalyst.
Cemcure Grout-M followed by Cemcure Grout-S offer excellent grouting in wet, water filled, fast flowing situation.USES:
• Can be used as a catalyst in cementitious grouting for all types of surfaces.
CEMCURE GROUT M
Cemcure Grout -M is a catalyst to enhance cement or clay grouting especially to stop fast running water or in voids containing water. This specific formulation is suitable for all sorts of Portland cement, pozzolanic materials and fly-ash.
Sometimes the void or the damaged area need low viscosity product which can be grouted and which interacts with the concrete or building material immediately.In such cases Cemcure Grout- M can be injected in pure form without any filler, in order of merit.
• Can be used for grouting of voids, honey combs, tiles.
CEMCURE GROUT HB
Cemcure Grout-HB is an injectable grout for consolidating sub surface soil. It is supplied as a brown powder that when injected into soil,enhances the strength and density and reduces permeability of the soil. Cemcure Grout-HB works by deep penetration and absorbing a tremendous amount of water. As water is absorbs the grout swells 15 times its original volume,pushes itself into cracks and voids,and stays in these areas permanently to seal against water entry.USES:
• Can be used at subsoil surface like basement floor and retaining wall.